net.sf.saxon.event
Interface Receiver

All Superinterfaces:
Result
All Known Implementing Classes:
AllElementStripper, AllElementValidator, AnyTypeValidator, AttributeCopier, AttributeValidator, Builder, CDATAFilter, CharacterMapExpander, Checker, CommentStripper, ComplexContentOutputter, ComplexContentValidator, ConstraintChecker, ContentHandlerProxy, ContentValidator, DocumentValidator, DOM4JWriter, DOMWriter, Emitter, EmptyContentValidator, EvaluationNuisance, FieldChecker, HTMLEmitter, HTMLIndenter, HTMLURIEscaper, IDFilter, IdValidator, IgnorableWhitespaceStripper, ImplicitResultChecker, JDOMWriter, LaxValidator, MessageEmitter, MessageWarner, MetaTagAdjuster, NamePoolConverter, NamespaceReducer, PIGrabber, Projector, ProxyReceiver, PTreeEmitter, SchemaModelLoader, SequenceExchanger.SequencePusher, SequenceFilter, SequenceOutputter, SequenceReceiver, SequenceTransmitter, SequenceWrapper, SequenceWriter, SimpleContentValidator, Sink, SkipValidator, StartTagBuffer, StreamingDespatcher, Stripper, StylesheetStripper, TeeOutputter, TEXTEmitter, TinyBuilder, TinyBuilderCondensed, TracingFilter, TransformerReceiver, TreeBuilder, TreeReceiver, TypeCheckingFilter, TypedContentHandler, UncommittedSerializer, UnicodeNormalizer, UseWhenFilter, ValidatingFilter, ValidationStack, VersionControlFilter, WatchManager, XHTMLEmitter, XHTMLIndenter, XHTMLURIEscaper, XML10ContentChecker, XMLEmitter, XMLIndenter, XOMWriter, XQueryEmitter, XSIAttributeHandler

public interface Receiver
extends Result

Receiver: This interface represents a recipient of XML tree-walking (push) events. It is based on SAX2's ContentHandler, but adapted to handle additional events, and to use Saxon's name pool. Namespaces and Attributes are handled by separate events following the startElement event. Schema types can be defined for elements and attributes.

The Receiver interface is an important internal interface within Saxon, and provides a powerful mechanism for integrating Saxon with other applications. It has been designed with extensibility and stability in mind. However, it should be considered as an interface designed primarily for internal use, and not as a completely stable part of the public Saxon API.

Author:
Michael H. Kay

Field Summary
 
Fields inherited from interface javax.xml.transform.Result
PI_DISABLE_OUTPUT_ESCAPING, PI_ENABLE_OUTPUT_ESCAPING
 
Method Summary
 void attribute(int nameCode, int typeCode, CharSequence value, int locationId, int properties)
          Notify an attribute.
 void characters(CharSequence chars, int locationId, int properties)
          Notify character data.
 void close()
          Notify the end of the event stream
 void comment(CharSequence content, int locationId, int properties)
          Notify a comment.
 void endDocument()
          Notify the end of a document node
 void endElement()
          Notify the end of an element.
 PipelineConfiguration getPipelineConfiguration()
          Get the pipeline configuration
 void namespace(int namespaceCode, int properties)
          Notify a namespace.
 void open()
          Notify the start of the event stream
 void processingInstruction(String name, CharSequence data, int locationId, int properties)
          Output a processing instruction
 void setPipelineConfiguration(PipelineConfiguration pipe)
          Set the pipeline configuration
 void setSystemId(String systemId)
          Set the System ID of the tree represented by this event stream
 void setUnparsedEntity(String name, String systemID, String publicID)
          Notify an unparsed entity URI.
 void startContent()
          Notify the start of the content, that is, the completion of all attributes and namespaces.
 void startDocument(int properties)
          Notify the start of a document node
 void startElement(int nameCode, int typeCode, int locationId, int properties)
          Notify the start of an element
 boolean usesTypeAnnotations()
          Ask whether this Receiver (or the downstream pipeline) makes any use of the type annotations supplied on element and attribute events
 
Methods inherited from interface javax.xml.transform.Result
getSystemId
 

Method Detail

setPipelineConfiguration

void setPipelineConfiguration(PipelineConfiguration pipe)
Set the pipeline configuration

Parameters:
pipe - the pipeline configuration

getPipelineConfiguration

PipelineConfiguration getPipelineConfiguration()
Get the pipeline configuration

Returns:
the pipeline configuration

setSystemId

void setSystemId(String systemId)
Set the System ID of the tree represented by this event stream

Specified by:
setSystemId in interface Result
Parameters:
systemId - the system ID (which is used as the base URI of the nodes if there is no xml:base attribute)

open

void open()
          throws XPathException
Notify the start of the event stream

Throws:
XPathException

startDocument

void startDocument(int properties)
                   throws XPathException
Notify the start of a document node

Parameters:
properties - bit-significant integer indicating properties of the document node. The definitions of the bits are in class ReceiverOptions
Throws:
XPathException

endDocument

void endDocument()
                 throws XPathException
Notify the end of a document node

Throws:
XPathException

setUnparsedEntity

void setUnparsedEntity(String name,
                       String systemID,
                       String publicID)
                       throws XPathException
Notify an unparsed entity URI.

Parameters:
name - The name of the unparsed entity
systemID - The system identifier of the unparsed entity
publicID - The public identifier of the unparsed entity
Throws:
XPathException

startElement

void startElement(int nameCode,
                  int typeCode,
                  int locationId,
                  int properties)
                  throws XPathException
Notify the start of an element

Parameters:
nameCode - integer code identifying the name of the element within the name pool.
typeCode - integer code identifying the element's type within the name pool. The value -1 indicates the default type, xs:untyped.
locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.
properties - bit-significant properties of the element node. If there are no revelant properties, zero is supplied. The definitions of the bits are in class ReceiverOptions
Throws:
XPathException

namespace

void namespace(int namespaceCode,
               int properties)
               throws XPathException
Notify a namespace. Namespaces are notified after the startElement event, and before any children for the element. The namespaces that are reported are only required to include those that are different from the parent element. The events represent namespace declarations and undeclarations rather than in-scope namespace nodes: an undeclaration is represented by a namespace code of zero. If the sequence of namespace events contains two A namespace must not conflict with any namespaces already used for element or attribute names.

Parameters:
namespaceCode - an integer: the top half is a prefix code, the bottom half a URI code. These may be translated into an actual prefix and URI using the name pool. A prefix code of zero represents the empty prefix (that is, the default namespace). A URI code of zero represents a URI of "", that is, a namespace undeclaration.
properties - The most important property is REJECT_DUPLICATES. If this property is set, the namespace declaration will be rejected if it conflicts with a previous declaration of the same prefix. If the property is not set, the namespace declaration will be ignored if it conflicts with a previous declaration. This reflects the fact that when copying a tree, namespaces for child elements are emitted before the namespaces of their parent element. Unfortunately this conflicts with the XSLT rule for complex content construction, where the recovery action in the event of conflicts is to take the namespace that comes last. XSLT therefore doesn't recover from this error: it sets the REJECT_DUPLICATES flag, and this is treated as a hard error.
Throws:
XPathException

attribute

void attribute(int nameCode,
               int typeCode,
               CharSequence value,
               int locationId,
               int properties)
               throws XPathException
Notify an attribute. Attributes are notified after the startElement event, and before any children. Namespaces and attributes may be intermingled.

Parameters:
nameCode - The name of the attribute, as held in the name pool
typeCode - The type of the attribute, as held in the name pool. The additional bit NodeInfo.IS_DTD_TYPE may be set to indicate a DTD-derived type.
value - the string value of the attribute
locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.
properties - Bit significant value. The following bits are defined:
DISABLE_ESCAPING
Disable escaping for this attribute
NO_SPECIAL_CHARACTERS
Attribute value contains no special characters
Throws:
IllegalStateException: - attempt to output an attribute when there is no open element start tag
XPathException

startContent

void startContent()
                  throws XPathException
Notify the start of the content, that is, the completion of all attributes and namespaces. Note that the initial receiver of output from XSLT instructions will not receive this event, it has to detect it itself. Note that this event is reported for every element even if it has no attributes, no namespaces, and no content.

Throws:
XPathException

endElement

void endElement()
                throws XPathException
Notify the end of an element. The receiver must maintain a stack if it needs to know which element is ending.

Throws:
XPathException

characters

void characters(CharSequence chars,
                int locationId,
                int properties)
                throws XPathException
Notify character data. Note that some receivers may require the character data to be sent in a single event, but in general this is not a requirement.

Parameters:
chars - The characters
locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.
properties - Bit significant value. The following bits are defined:
DISABLE_ESCAPING
Disable escaping for this text node
USE_CDATA
Output as a CDATA section
Throws:
XPathException

processingInstruction

void processingInstruction(String name,
                           CharSequence data,
                           int locationId,
                           int properties)
                           throws XPathException
Output a processing instruction

Parameters:
name - The PI name. This must be a legal name (it will not be checked).
data - The data portion of the processing instruction
locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.
properties - Additional information about the PI. The following bits are defined:
CHECKED
Data is known to be legal (e.g. doesn't contain "?>")
Throws:
IllegalArgumentException: - the content is invalid for an XML processing instruction
XPathException

comment

void comment(CharSequence content,
             int locationId,
             int properties)
             throws XPathException
Notify a comment. Comments are only notified if they are outside the DTD.

Parameters:
content - The content of the comment
locationId - an integer which can be interpreted using a LocationProvider to return information such as line number and system ID. If no location information is available, the value zero is supplied.
properties - Additional information about the comment. The following bits are defined:
CHECKED
Comment is known to be legal (e.g. doesn't contain "--")
Throws:
IllegalArgumentException: - the content is invalid for an XML comment
XPathException

close

void close()
           throws XPathException
Notify the end of the event stream

Throws:
XPathException

usesTypeAnnotations

boolean usesTypeAnnotations()
Ask whether this Receiver (or the downstream pipeline) makes any use of the type annotations supplied on element and attribute events

Returns:
true if the Receiver makes any use of this information. If false, the caller may supply untyped nodes instead of supplying the type annotation


Copyright (c) Saxonica Limited. All rights reserved.