Class SlashExpression

All Implemented Interfaces:
ContextOriginator, ContextSwitchingExpression, ExportAgent, Locatable, IdentityComparable, Traceable
Direct Known Subclasses:
SimpleStepExpression

public class SlashExpression extends BinaryExpression implements ContextSwitchingExpression
A slash expression is any expression using the binary slash operator "/". The parser initially generates a slash expression for all occurrences of the binary "/" operator, wrapped in a documentSort() function to do the sorting and de-duplication required by the semantics of path expressions. The documentSort() is subsequently stripped off by the optimizer if sorting and deduplication is found to be unnecessary. The slash expression itself, therefore, does not perform sorting or de-duplication.
  • Constructor Details

    • SlashExpression

      public SlashExpression(Expression start, Expression step)
      Constructor
      Parameters:
      start - The left hand operand (which must always select a sequence of nodes).
      step - The step to be followed from each node in the start expression to yield a new sequence; this may return either nodes or atomic values (but not a mixture of the two)
  • Method Details

    • getOperandRole

      protected OperandRole getOperandRole(int arg)
      Description copied from class: BinaryExpression
      Get the operand role
      Overrides:
      getOperandRole in class BinaryExpression
      Parameters:
      arg - which argument: 0 for the lhs, 1 for the rhs
      Returns:
      the operand role
    • getStart

      public Expression getStart()
      Get the left-hand operand
      Returns:
      the left-hand operand
    • setStart

      public void setStart(Expression start)
      Set the left-hand operand
      Parameters:
      start - the left-hand operand
    • getStep

      public Expression getStep()
      Get the right-hand operand
      Returns:
      the right-hand operand
    • setStep

      public void setStep(Expression step)
      Set the right-hand operand
      Parameters:
      step - the right-hand operand
    • getExpressionName

      public String getExpressionName()
      Description copied from class: Expression
      Get a name identifying the kind of expression, in terms meaningful to a user.
      Overrides:
      getExpressionName in class Expression
      Returns:
      a name identifying the kind of expression, in terms meaningful to a user. The name will always be in the form of a lexical XML QName, and should match the name used in export() output displaying the expression.
    • getSelectExpression

      public Expression getSelectExpression()
      Get the start expression (the left-hand operand)
      Specified by:
      getSelectExpression in interface ContextSwitchingExpression
      Returns:
      the first operand
    • getActionExpression

      public Expression getActionExpression()
      Get the step expression (the right-hand operand)
      Specified by:
      getActionExpression in interface ContextSwitchingExpression
      Returns:
      the second operand
    • disableIndexing

      public void disableIndexing()
    • getItemType

      public final ItemType getItemType()
      Determine the data type of the items returned by this exprssion
      Specified by:
      getItemType in class Expression
      Returns:
      the type of the step
    • getStaticUType

      public UType getStaticUType(UType contextItemType)
      Get the static type of the expression as a UType, following precisely the type inference rules defined in the XSLT 3.0 specification.
      Overrides:
      getStaticUType in class Expression
      Parameters:
      contextItemType - the static type of the context item
      Returns:
      the static item type of the expression according to the XSLT 3.0 defined rules
    • getIntegerBounds

      public IntegerValue[] getIntegerBounds()
      For an expression that returns an integer or a sequence of integers, get a lower and upper bound on the values of the integers that may be returned, from static analysis. The default implementation returns null, meaning "unknown" or "not applicable". Other implementations return an array of two IntegerValue objects, representing the lower and upper bounds respectively. The values UNBOUNDED_LOWER and UNBOUNDED_UPPER are used by convention to indicate that the value may be arbitrarily large. The values MAX_STRING_LENGTH and MAX_SEQUENCE_LENGTH are used to indicate values limited by the size of a string or the size of a sequence.
      Overrides:
      getIntegerBounds in class Expression
      Returns:
      the lower and upper bounds of integer values in the result, or null to indicate unknown or not applicable.
    • typeCheck

      public Expression typeCheck(ExpressionVisitor visitor, ContextItemStaticInfo contextInfo) throws XPathException
      Type-check the expression
      Overrides:
      typeCheck in class BinaryExpression
      Parameters:
      visitor - an expression visitor
      contextInfo - Information available statically about the context item: whether it is (possibly) absent; its static type; its streaming posture.
      Returns:
      the original expression, rewritten to perform necessary run-time type checks, and to perform other type-related optimizations
      Throws:
      XPathException - if an error is discovered during this phase (typically a type error)
    • simplifyDescendantPath

      public SlashExpression simplifyDescendantPath(StaticContext env)
    • optimize

      public Expression optimize(ExpressionVisitor visitor, ContextItemStaticInfo contextItemType) throws XPathException
      Description copied from class: BinaryExpression
      Perform optimisation of an expression and its subexpressions.

      This method is called after all references to functions and variables have been resolved to the declaration of the function or variable, and after all type checking has been done.

      Overrides:
      optimize in class BinaryExpression
      Parameters:
      visitor - an expression visitor
      contextItemType - the static type of "." at the point where this expression is invoked. The parameter is set to null if it is known statically that the context item will be undefined. If the type of the context item is not known statically, the argument is set to Type.ITEM_TYPE
      Returns:
      the original expression, rewritten if appropriate to optimize execution
      Throws:
      XPathException - if an error is discovered during this phase (typically a type error)
    • tryToMakeAbsolute

      public SlashExpression tryToMakeAbsolute()
      Test whether a path expression is an absolute path - that is, a path whose first step selects a document node; if not, see if it can be converted to an absolute path. This is possible in cases where the path expression has the form a/b/c and it is known that the context item is a document node; in this case it is safe to change the path expression to /a/b/c
      Returns:
      the path expression if it is absolute; the converted path expression if it can be made absolute; or null if neither condition applies.
    • getCost

      public double getCost()
      Return the estimated cost of evaluating an expression. This is a very crude measure based on the syntactic form of the expression (we have no knowledge of data values). We take the cost of evaluating a simple scalar comparison or arithmetic expression as 1 (one), and we assume that a sequence has length 5. The resulting estimates may be used, for example, to reorder the predicates in a filter expression so cheaper predicates are evaluated first.
      Overrides:
      getCost in class Expression
      Returns:
      the cost estimate
    • tryToMakeSorted

      public Expression tryToMakeSorted(ExpressionVisitor visitor, ContextItemStaticInfo contextItemType)
    • unordered

      public Expression unordered(boolean retainAllNodes, boolean forStreaming) throws XPathException
      Replace this expression by a simpler expression that delivers the results without regard to order.
      Overrides:
      unordered in class Expression
      Parameters:
      retainAllNodes - set to true if the result must contain exactly the same nodes as the original; set to false if the result can eliminate (or introduce) duplicates.
      forStreaming - set to true if optimizing for streaming
      Returns:
      an expression that delivers the same nodes in a more convenient order
      Throws:
      XPathException - if the rewrite fails
    • addToPathMap

      public PathMap.PathMapNodeSet addToPathMap(PathMap pathMap, PathMap.PathMapNodeSet pathMapNodeSet)
      Add a representation of this expression to a PathMap. The PathMap captures a map of the nodes visited by an expression in a source tree.
      Overrides:
      addToPathMap in class Expression
      Parameters:
      pathMap - the PathMap to which the expression should be added
      pathMapNodeSet - the PathMapNodeSet to which the paths embodied in this expression should be added
      Returns:
      the pathMapNode representing the focus established by this expression, in the case where this expression is the first operand of a path expression or filter expression
    • getImplementationMethod

      public int getImplementationMethod()
      An implementation of Expression must provide at least one of the methods evaluateItem(), iterate(), or process(). This method indicates which of these methods is provided directly. The other methods will always be available indirectly, using an implementation that relies on one of the other methods.
      Overrides:
      getImplementationMethod in class BinaryExpression
      Returns:
      the implementation method, for example Expression.ITERATE_METHOD or Expression.EVALUATE_METHOD or Expression.PROCESS_METHOD
    • copy

      public Expression copy(RebindingMap rebindings)
      Copy an expression. This makes a deep copy.
      Specified by:
      copy in class Expression
      Parameters:
      rebindings - variables that need to be re-bound
      Returns:
      the copy of the original expression
    • computeSpecialProperties

      protected int computeSpecialProperties()
      Get the static properties of this expression (other than its type). The result is bit-signficant. These properties are used for optimizations. In general, if property bit is set, it is true, but if it is unset, the value is unknown.
      Overrides:
      computeSpecialProperties in class BinaryExpression
      Returns:
      StaticProperty.NO_NODES_NEWLY_CREATED. This is overridden for some subclasses.
    • computeCardinality

      protected int computeCardinality()
      Determine the static cardinality of the expression
      Overrides:
      computeCardinality in class BinaryExpression
      Returns:
      the computed cardinality, as one of the values StaticProperty.ALLOWS_ZERO_OR_ONE, StaticProperty.EXACTLY_ONE, StaticProperty.ALLOWS_ONE_OR_MORE, StaticProperty.ALLOWS_ZERO_OR_MORE. May also return StaticProperty.ALLOWS_ZERO if the result is known to be an empty sequence, or StaticProperty.ALLOWS_MANY if if is known to return a sequence of length two or more.
    • toPattern

      public Pattern toPattern(Configuration config) throws XPathException
      Convert this expression to an equivalent XSLT pattern
      Overrides:
      toPattern in class Expression
      Parameters:
      config - the Saxon configuration
      Returns:
      the equivalent pattern
      Throws:
      XPathException - if conversion is not possible
    • isContextFree

      public boolean isContextFree()
      A SlashExpression is context free if the right-hand argument is an AxisExpression. This allows evaluation without creating a new XPathContext or FocusTrackingIterator; the expression can be evaluated as a simple flat-mapping function from nodes to nodes.
      Returns:
      true if the expression has been assessed as context-free, that is, if the right-hand operand is an AxisExpression
    • setContextFree

      public void setContextFree(boolean free)
      Mark this expression as being context free (or not). This is done during reloading from a SEF file.
      Parameters:
      free - true if the expression has been assessed as context-free, that is, if the right-hand operand is an AxisExpression
    • equals

      public boolean equals(Object other)
      Is this expression the same as another expression?
      Overrides:
      equals in class BinaryExpression
      Parameters:
      other - the other operand; the result is false if this is not an Expression
      Returns:
      true if the other operand is an expression and if it can be determined that the two expressions are equivalent, in the sense that they will always return the same result.
    • computeHashCode

      protected int computeHashCode()
      get HashCode for comparing two expressions
      Overrides:
      computeHashCode in class BinaryExpression
      Returns:
      a computed hash code
    • iterate

      public SequenceIterator iterate(XPathContext context) throws XPathException
      Iterate the path-expression in a given context
      Overrides:
      iterate in class Expression
      Parameters:
      context - the evaluation context
      Returns:
      a SequenceIterator that can be used to iterate over the result of the expression
      Throws:
      XPathException - if any dynamic error occurs evaluating the expression
    • export

      public void export(ExpressionPresenter destination) throws XPathException
      Diagnostic print of expression structure. The abstract expression tree is written to the supplied output destination.
      Specified by:
      export in interface ExportAgent
      Overrides:
      export in class BinaryExpression
      Parameters:
      destination - the output destination for the displayed expression tree
      Throws:
      XPathException - if the export fails, for example if an expression is found that won't work in the target environment.
    • toString

      public String toString()
      The toString() method for an expression attempts to give a representation of the expression in an XPath-like form, but there is no guarantee that the syntax will actually be true XPath. In the case of XSLT instructions, the toString() method gives an abstracted view of the syntax
      Overrides:
      toString in class BinaryExpression
      Returns:
      a representation of the expression as a string
    • toShortString

      public String toShortString()
      Description copied from class: Expression
      Produce a short string identifying the expression for use in error messages
      Overrides:
      toShortString in class BinaryExpression
      Returns:
      a short string, sufficient to identify the expression
    • getFirstStep

      public Expression getFirstStep()
      Get the first step in this expression. A path expression A/B/C is represented as (A/B)/C, but the first step is A
      Returns:
      the first step in the expression, after expanding any nested path expressions
    • getRemainingSteps

      public Expression getRemainingSteps()
      Get all steps after the first. This is complicated by the fact that A/B/C is represented as ((A/B)/C; we are required to return B/C
      Returns:
      a path expression containing all steps in this path expression other than the first, after expanding any nested path expressions
    • getLastStep

      public Expression getLastStep()
      Get the last step of the path expression
      Returns:
      the last step in the expression, after expanding any nested path expressions
    • getLeadingSteps

      public Expression getLeadingSteps()
      Get a path expression consisting of all steps except the last
      Returns:
      a path expression containing all steps in this path expression other than the last, after expanding any nested path expressions
    • isAbsolute

      public boolean isAbsolute()
      Test whether a path expression is an absolute path - that is, a path whose first step selects a document node
      Returns:
      true if the first step in this path expression selects a document node
    • getStreamerName

      public String getStreamerName()
      Get the (partial) name of a class that supports streaming of this kind of expression
      Overrides:
      getStreamerName in class Expression
      Returns:
      the partial name of a class that can be instantiated to provide streaming support in Saxon-EE, or null if there is no such class
    • getElaborator

      public Elaborator getElaborator()
      Make an elaborator for this expression
      Overrides:
      getElaborator in class Expression
      Returns:
      a suitable elaborator