Class PreparedSchema

  • All Implemented Interfaces:
    NotationSet
    Direct Known Subclasses:
    SingleNamespaceSchema

    public class PreparedSchema
    extends java.lang.Object
    implements NotationSet
    A schema is a collection of schema components. It may be derived from a single schema document (an xs:schema element), in which case it contains those components defined in that schema document, the components defined in the included documents (expanded transitively), and the components defined in imported schema documents (not expanded transitively). Alternatively, it may be a collection of schema components derived from multiple independent schema documents.

    All components in the schema are indexed by name. In addition, elements, attributes, and types are indexed by their integer NamePool fingerprint.

    Construction of the PreparedSchema is not thread-safe; all creation of new components must happen in a single thread.

    • Constructor Detail

      • PreparedSchema

        protected PreparedSchema()
        Create a dummy schema definition. This constructor is defined only for use by subclasses
      • PreparedSchema

        public PreparedSchema​(EnterpriseConfiguration config)
        Create a new Schema definition
        Parameters:
        config - The configuration object holding system configuration information
    • Method Detail

      • setLocalLicenseId

        public void setLocalLicenseId​(int id)
        Set the local license id, identifying any local license in the case where this package was loaded from a compiled package that contained its own embedded license
        Parameters:
        id - identifier used to distinguish this local license
      • getLocalLicenseId

        public int getLocalLicenseId()
        Get the local license id, identifying any local license in the case where this package was loaded from a compiled package that contained its own embedded license
        Returns:
        integer identifying the local license, or -1 if there is none
      • addComponent

        public void addComponent​(UserSchemaComponent obj)
        Add an object that might contain a forwards reference to be fixed up later
        Parameters:
        obj - the component to be added. The caller should ensure that the same component is not added twice.
      • getAttributeDecl

        public AttributeDecl getAttributeDecl​(StructuredQName name)
        Get the attribute declaration with a given name if there is one.
        Parameters:
        name - the name of the required attribute declaration
        Returns:
        the attribute declaration if found, or null otherwise
      • getAttributeDecl

        public AttributeDecl getAttributeDecl​(int fingerprint)
        Get the attribute declaration with a given name if there is one.
        Parameters:
        fingerprint - the NamePool fingerprint of the name of the required attribute declaration
        Returns:
        the attribute declaration if found, or null otherwise
      • getAttributeDeclarations

        public java.lang.Iterable<AttributeDecl> getAttributeDeclarations()
        Get all the global attribute declarations defined in this schema
        Returns:
        an iterable collection of attribute declarations. Each item returned by the iterator will be an instance of AttributeDecl
      • addAttributeDecl

        public void addAttributeDecl​(AttributeDecl attribute)
        Adds the given global attribute declaration to this Schema. It will overwrite any existing attribute declaration with the same name.
        Parameters:
        attribute - the AttributeDecl to add
      • getAttributeGroup

        public AttributeGroupDecl getAttributeGroup​(StructuredQName name)
        Get the attribute declaration with a given name if there is one.
        Parameters:
        name - the name of the required attribute group
        Returns:
        the attribute declaration if found, or null otherwise
      • getAllAttributeGroups

        public java.lang.Iterable<AttributeGroupDecl> getAllAttributeGroups()
        Get an iterator over all the named attribute groups defined in this schema
        Returns:
        an iterator over the attribute groups. Each item returned by the iterator will be an instance of AttributeGroupDecl
      • addAttributeGroup

        public void addAttributeGroup​(AttributeGroupDecl attributeGroup)
        Adds the given attribute group declaration to this Schema. It will overwrite any existing attribute group declaration with the same name, unless the existing attribute has a higher redefinition level.
        Parameters:
        attributeGroup - the AttributeDecl to add
      • getGroup

        public ModelGroupDefinition getGroup​(StructuredQName name)
        Get the model group with a given name if there is one.
        Parameters:
        name - the name of the required named model group
        Returns:
        the group if found, or null otherwise
      • getAllModelGroups

        public java.lang.Iterable<ModelGroupDefinition> getAllModelGroups()
        Get an iterator over all the named model groups defined in this schema
        Returns:
        an iterator over the model groups. Each item returned by the iterator will be an instance of ModelGroupDefinition
      • addGroup

        public void addGroup​(ModelGroupDefinition group)
        Adds the given group (xs:group) to this Schema. It will overwrite any existing group with the same name.
        Parameters:
        group - the group to add
      • getSchemaType

        public SchemaType getSchemaType​(StructuredQName name)
        Get the type with a given name if there is one. This method will also find built-in types.
        Parameters:
        name - the name of the required schema type
        Returns:
        the named simple or complex type if found, or null otherwise
      • getSimpleType

        public SimpleType getSimpleType​(StructuredQName name)
        Get the simple type with a given name if there is one. This method will also find built-in types.
        Parameters:
        name - the name of the required simple type
        Returns:
        the simple type if found, or null otherwise
      • getAllTypes

        public java.lang.Iterable<SchemaType> getAllTypes()
        Get all the named simple and complex types defined in this schema. This iterable will not include built-in types or anonymous types.
        Returns:
        an iterable of the types.
      • addType

        public void addType​(SchemaType type)
        Adds the given type definition to this Schema. If another type with this name already exists, it is overwritten, unless it has a higher redefinition level
        Parameters:
        type - the type to add to this Schema
      • addAnonymousType

        public void addAnonymousType​(SchemaType type)
        Register an anonymous type defined in this schema
        Parameters:
        type - the anonymous type to be added
      • getType

        public SchemaType getType​(StructuredQName name)
        Get type defined in this schema, searching both named and anonymous types
        Parameters:
        name - the name of the required schema type
        Returns:
        the schema type if found, else null
      • registerExtensionOfBuiltInType

        public void registerExtensionOfBuiltInType​(int fp,
                                                   UserComplexType extension)
        Register a complex type that extends a built-in simple type
        Parameters:
        fp - the fingerprint of the built-in type
        extension - the complex type that extends the built-in (directly or indirectly)
      • getExtensionsOfBuiltInType

        public java.util.Set<UserComplexType> getExtensionsOfBuiltInType​(int fp)
        Get the set of user-defined complex types that extend a given built-in type
        Parameters:
        fp - the fingerprint of the built-in type
        Returns:
        the set of user-defined complex types that have been registered as extensions of this built-in type
      • addElementDecl

        public void addElementDecl​(ElementDecl elementDecl)
        Adds the given global element declaration to this Schema definition
        Parameters:
        elementDecl - the ElementDecl to add to this Schema
      • getElementDecl

        public ElementDecl getElementDecl​(StructuredQName name)
        Get the global element declaration with a given name
        Parameters:
        name - the name of the element
        Returns:
        the element declaration, or null if not found.
      • getElementDecl

        public ElementDecl getElementDecl​(int fingerprint)
        Get the global element declaration with a given fingerprint
        Parameters:
        fingerprint - the NamePool fingerprint of the name of the element
        Returns:
        the element declaration, or null if not found.
      • getElementDeclarations

        public java.lang.Iterable<ElementDecl> getElementDeclarations()
        Get an iterator over all the global element declarations defined in this schema.
        Returns:
        an iterator over the global element declarations. Each item returned by the iterator will be an instance of ElementDecl
      • addNotation

        public void addNotation​(Notation notation)
        Adds the given Notation declaration to this Schema defintion
        Parameters:
        notation - the Notation to add to this Schema
      • getNotation

        public Notation getNotation​(StructuredQName notationName)
        Get the notation with a given name
        Parameters:
        notationName - identifies the name of the notation
        Returns:
        the element notation, or null if not found.
      • getAllNotations

        public java.lang.Iterable<Notation> getAllNotations()
        Get an iterator over all the notations defined in this schema.
        Returns:
        an iterator over the notations. Each item returned by the iterator will be an instance of Notation
      • addIdentityConstraint

        public void addIdentityConstraint​(IdentityConstraint constraint)
        Add an identity constraint
        Parameters:
        constraint - the identity constraint to be added
      • getIdentityConstraint

        public IdentityConstraint getIdentityConstraint​(StructuredQName name)
        Get the identity constraint whose name has a given fingerprint
        Parameters:
        name - the name of the required constraint
        Returns:
        the identity constraint, or null if there is none with that name
      • getIdentityConstraints

        public java.lang.Iterable<IdentityConstraint> getIdentityConstraints()
        Get an iterator over all the identity constraints defined in this schema (that is, unique, key, and keyref components).
        Returns:
        an iterator over the identity constraints. Each item returned by the iterator will be an instance of IdentityConstraint
      • getTargetNamespaces

        public java.util.Set<NamespaceUri> getTargetNamespaces()
        Get the set of all target namespaces of components present in this schema
        Returns:
        the set of all target namespaces for these components
      • getNamePool

        public NamePool getNamePool()
        Get the NamePool used by this schema
        Returns:
        the namepool
      • addGlobalParam

        public void addGlobalParam​(GlobalParam param)
                            throws SchemaException
        Declare a global parameter for XPath expressions in this schema document (Saxon extension)
        Parameters:
        param - the details of the parameter
        Throws:
        SchemaException
      • getGlobalParam

        public GlobalParam getGlobalParam​(StructuredQName name)
        Get the GlobalParam object representing a named parameter (Saxon extension)
        Parameters:
        name - the parameter name
        Returns:
        the GlobalParam object if a parameter with this name exists, else null
      • getGlobalParams

        public java.util.Collection<GlobalParam> getGlobalParams()
        Return the set of global parameters defined in this schema document
        Returns:
        the set of global parameters
      • copyTo

        public void copyTo​(PreparedSchema destination,
                           SchemaCompiler compiler)
                    throws SchemaException
        Copy the components of this schema to another schema
        Parameters:
        destination - the destination of the copy
        compiler - used for error reporting
        Throws:
        SchemaException - if there are name clashes between this schema and the destination schema (that is, the same name used to refer to different components. Components are compared by checking their name and origin, where the origin is the SystemId and line number of the schema document from which they were initially derived)
      • validate

        public boolean validate​(SchemaCompiler compiler)
                         throws SchemaException
        Checks the validity of this Schema definition, and if valid, adds the schema to the cache held by the EnterpriseConfiguration
        Parameters:
        compiler - a SchemaCompiler to which all errors should be reported
        Returns:
        true if validation succeeds, false if it fails
        Throws:
        SchemaException - if the SchemaCompiler decides that an error is fatal
      • validateReference

        public static SchemaComponent validateReference​(ComponentReference ref,
                                                        SchemaCompiler compiler,
                                                        boolean fatal)
                                                 throws SchemaException
        Helper method to validate that a reference to a schema component can be resolved
        Parameters:
        ref - The Component reference that needs to be resolved
        compiler - used for error reporting
        fatal - True if failure to resolve the reference is an error rather than a warning
        Returns:
        the target of the reference
        Throws:
        SchemaException - if the reference cannot be resolved
      • merge

        public static PreparedSchema merge​(PreparedSchema ps1,
                                           PreparedSchema ps2)
                                    throws SchemaException
        Merge two PreparedSchemas into one, rejecting any components that are defined in both.
        Parameters:
        ps1 - the first PreparedSchema
        ps2 - the second PreparedSchema
        Returns:
        the merged PreparedSchema
        Throws:
        SchemaException - if there are inconsistencies between the two schemas, for example different components with the same name
      • isDeclaredNotation

        public boolean isDeclaredNotation​(NamespaceUri uri,
                                          java.lang.String local)
        Description copied from interface: NotationSet
        Ask whether a given notation name is present in this set of notations
        Specified by:
        isDeclaredNotation in interface NotationSet
        Parameters:
        uri - the URI part of the notation name
        local - the local part of the notation name
        Returns:
        true if the notation name is present